How to create Schematics using WorldEdit

Hello, in this tutorial we will learn how to create a schematic in a simple way. Whether you want to save a build or copy terrain to use it elsewhere, we will show you the process step by step. (For this tutorial you will need FastAsyncWorldEdit) Join your server Once we are inside the server, we will use the command //wand, which will give us the necessary tool to use WorldEdit. Now, we will go to the first corner of the build or terrain we want to copy and type the command //up 1

Once we are at the first corner, left-click on the block. This will mark the first corner. Now, go to the other corner, type //up 1 again and this time, right-click, which will mark the second position.

With both corners selected, it is time to expand the height of the selection. To do this, type the command //expand vert

Then, type the command //copy, wait for our selection to be copied and save it with the following command: //schematic save <Name>

Now that we have saved the schematic, we will proceed to download it from our server panel. Follow these steps:

1. Go to the folder plugins.
2. Open the corresponding plugin folder (in this case, FastAsyncWorldEdit).
3. Enter the folder schematics.
4. Find the file with the name you saved it as.
5. Right-click on the file and select Download.

Done! Now we know how to create schematics and download them for later use.

Conclusion

We hope this guide has been useful and remember🚀, don't hesitate to ask on HolyHosting Discord or contact our support.

Follow us on Twitter (@HolyHosting) to stay up to date.

Cheers!!

Stuffy @ HolyHosting